Brother DCP-1510 Service Manual page 180

1.3.20 1.3.20 Print test Print test pattern
<Function> <Function>
This function is used to print a test pattern to check whether the developer roller or exposure This function is used to print a test pattern to check whether the developer roller or exposure
drum is dirty or damaged. drum is dirty or damaged.
<Operating Procedure> <Operating Procedure>
DCP-15** series, MFC-18** series DCP-15** series, MFC-18** series
(1 (1) ) Nu
(2) "PRINTI (2)
(3) T T o print the 2 (3)
(4) When the [S (4)
pattern (function code: (function code: 71)
Nume meri ric ke c key pa y pad mo d mode dels ls
Press the [7] and [1] buttons in this order in the initial state of maintenance mode. Press the [7] and [1] buttons in this order in the initial state of maintenance mode.
Non-numeric key pad models Non-numeric key pad models
Pr Pres ess th s the [ e [ ] or ] or [ [ ] butt tton t ] bu
[OK] button. [OK] button.
"PRINTING" is dis NG" is displayed o played on the LCD, an
the paper. the paper.
When printing is completed, "2D3S K" is displayed on the LCD. When printing is completed, "2D3S K" is displayed on the LCD.
o print the 2D3S patt D3S pattern agai ern again, press th
When the [Stop/Exi top/Exit] button i t] button is presse
maintenance mode. maintenance mode.
Note: Note:
• • If printing fai If printing fails, printi ls, printing is stopped and one of the error ng is stopped and one of the errors shown in the table bel
displayed. T displayed. To retry printing, refer to the o retry printing, refer to the "Remedy" in the table below to eliminate the
cause of the error, and press the [Start] button. cause of the error, and press the [Start] button.
Fig. 4-10 Fig. 4-10
4-29 4-29
71)
on to di o disp spla lay "M y "MAI AINTE NTENA NANC
n the LCD, and the 2D3S p d the 2D3S pattern is p
n, press the [St e [Start] butt art] button.
s pressed, the mach d, the machine retur ine returns to the ini
"Remedy" in the table below to eliminate the
NCE 71 E 71" on " on th the LC e LCD an D and pr d pres
attern is printed on a s rinted on a single si ingle side of
on.
ns to the initial st tial state of ate of
s shown in the table below is
Confidential Confidential
ess th s the e
de of
ow is