Brother DCP-1510 Service Manual page 154

1. 1.3 3 Deta tails De
1.3.1 1.3.1 Initia Initialize E
<Function> <Function>
This function is used to initialize the setting values for operation parameters, user switches, This function is used to initialize the setting values for operation parameters, user switches,
and worker switches (WSW) registered in the EEPROM. Entering function code 01 initializes and worker switches (WSW) registered in the EEPROM. Entering function code 01 initializes
most EEPROM areas. Entering function code 91 initializes only the specified areas as shown most EEPROM areas. Entering function code 91 initializes only the specified areas as shown
in the table below. in the table below.
Data item Data item
Printer switch (counter information) Printer switch (counter information)
Error history Error history
MAC address MAC address
Password for control panel operation lock Password for control panel operation lock
Secure function lock Secure function lock
Telephone function registration Telephone function registration
Telephone directory Telephone directory
Worker switches Worker switches
User switches (items initialized when User switches (items initialized when
"Factory Reset" is executed) "Factory Reset" is executed)
Function settings except user switches Function settings except user switches
(settings not subject to "Factory Reset") (settings not subject to "Factory Reset")
Emulation setting Emulation setting
<Operating Procedure> <Operating Procedure>
(1 (1) ) Nu
(2) When initializing parameters is completed, the machine returns to the initial state of (2)
Note: Note:
• • Functio
• • When the power swit
ils of of Ma Main inte tena nanc nce e Mo
lize EEPRO EPROM pa M param rameter
Nume meri ric ke c key pa y pad mo d mode dels ls
Press the [0] and [1] buttons in this order in the initial state of maintenance mode (or Press the [0] and [1] buttons in this order in the initial state of maintenance mode (or
press the [9] and [1] buttons in this order as appropriate) to display press the [9] and [1] buttons in this order as appropriate) to display "PARAMETER INIT"
on the LCD. on the LCD.
Non-numeric key pad models Non-numeric key pad models
Pres Pr ess t s the he [ [ ] or ] or [ [ ] butt ] b utton
appropriate) on the LCD. Press the [OK] button. "PARAMETER INIT" is displayed on the appropriate) on the LCD. Press the [OK] button. "PARAMETER INIT" is displayed on the
LCD. LCD.
When initializing parameters is completed, the machine returns to the initial state of
maintenanc maintenance e mode. mode.
Function code 01 is for servi n code 01 is for service person
When the power switch is turned OFF while "P ch is turned OFF while "PARAMETER INI
LCD, initializing the EEPROM is LCD, initializing the EEPROM is not completed normally. In this case, when the power
switch is turned ON, the EE switch is turned ON, the EEPROM is initialized automatically. When initialization is
completed, the machine returns to the initial state of maintenance mode. completed, the machine returns to the initial state of maintenance mode.
4-3 4-3
Mode de Fu Func nctio tions ns
eters (fun s (function ction code: code: 01, 9 01, 91) 1)
Function code Function code
Areas not to be Areas not to be
initialized initialized
Areas to be Areas to be
initialized initialized
on to to di disp spla lay y "MA "MAIN INTEN TENAN ANCE
ce personnel and funct nel and function code 91 is for user s ion code 91 is for user support.
ARAMETER INIT" is displaye
not completed normally. In this case, when the power
PROM is initialized automatically. When initialization is
0 0 1 1 9 9 1 1
Areas not to be Areas not to be
initialized initialized
Areas to be Areas to be
initialized initialized
"PARAMETER INIT"
CE 01 01" ( " (or or "MA "MAIN INTEN TENAN ANCE
upport.
T" is displayed on the d on the
Confidential Confidential
CE 91 91" a " as s