Brother DCP-1510 Service Manual page 104

(4) Remov (4)
(5) Remov (5)
Harness routing: Refer to " Harness routing: Refer to
ASSY)" ASSY)
(6) Close (6)
Remove the speake e the speaker hold sprin r hold spring from the sid
cover R, and release the speaker harness from the securing fixtures (only for MFC cover R, and release the speaker harness from the securing fixtures (only for MFC
models). models).
Remove the tapt e the taptite bind B M4 ite bind B M4x12 screw
cover from the side cover R. Release the fan harness from the securing fixtures, and cover from the side cover R. Release the fan harness from the securing fixtures, and
remove the fan from the side cover R (only for models with fan). remove the fan from the side cover R (only for models with fan).
Taptite bind B M4x12 Taptite bind B M4x12
(only for models with fan) (only for models with fan)
Fan (only for models with fan) Fan (only for models with fan)
Fan harness Fan harness
Speaker hold spring Speaker hold spring
(only for MFC models) (only for MFC models)
Speaker Speaker
(only for MFC models) (only for MFC models)
Speaker harness Speaker harness
" 15. 15 .
" . .
Close the top the top cover cover ASSY and ASSY and the doc
2-16 2-16
g from the side cover R. Remo e cover R. Remove the speak
x12 screw, and relea , and release the each h se the each hook to remo
Fig. 2-6 Fig. 2-6
Fan (only for models with fan) / speaker harness (side cover R Fan (only for models with fan) / speaker harness (side cover R
the document s ument scanner canner unit.
ve the speaker from the sid er from the side e
ook to remove the fan ve the fan
Fan cover Fan cover
(only for models with fan) (only for models with fan)
Hook Hook
Hook Hook
Side cover R Side cover R
unit.
Confidential Confidential