Download Print this page

Brother DCP-1510 Service Manual page 34

Laser mfc
Hide thumbs Also See for DCP-1510:

Advertisement

   
Print Unable**
Print Unable**
Replace Drum
Replace Drum
Replace Toner 
Replace Toner 
Scan Unable**
Scan Unable**
Scanner Error 
Scanner Error 
Self-Diagnostic
Self-Diagnostic
Size Mismatch
Size Mismatch
Toner Ended
Toner Ended
Toner Low
Toner Low
Wrong Paper
Wrong Paper
Type
Type
F F i i r r s s t t l l i i n n e e
S S e e c c o o n n d d l l i i n n e e
Turn the power off and
Turn the power off and
then back on again.
then back on again.
   
Open the Scanner Cover
Open the Scanner Cover
and Top Cover, replace
and Top Cover, replace
Toner Cartridge.
Toner Cartridge.
Received faxes are also
Received faxes are also
stored in memory until the
stored in memory until the
toner cartridge is replaced
toner cartridge is replaced
or the memory is full.
or the memory is full.
   
   
Turn the power off, then on
Turn the power off, then on
again. Leave the machine
again. Leave the machine
for 15 min.
for 15 min.
Will Automatically Restart
Will Automatically Restart
within 15 minutes.
within 15 minutes.
Fax received. Set correct
Fax received. Set correct
paper size in menu.
paper size in menu.
Reload correct paper, then
Reload correct paper, then
press Start.
press Start.
Open the Scanner Cover
Open the Scanner Cover
and Top Cover, replace
and Top Cover, replace
Toner Cartridge.
Toner Cartridge.
Prepare New Toner
Prepare New Toner
Cartridge.
Cartridge.
Reload with A4, Letter,
Reload with A4, Letter,
Legal or Folio paper, and
Legal or Folio paper, and
press Start.
press Start.
 A printing error occurred.
 A printing error occurred.
Refer to error codes for "**".
Refer to error codes for "**".
The number of rotations of the drum
The number of rotations of the drum
- -
unit has reached the life limit.
unit has reached the life limit.
Dot counter or developer roller
Dot counter or developer roller
counter of the toner has reached
counter of the toner has reached
the upper limit (when setting toner
the upper limit (when setting toner
stop mode).
stop mode).
Dot counter or developer roller
Dot counter or developer roller
counter of the toner is reaching the
counter of the toner is reaching the
upper limit (when setting continue
upper limit (when setting continue
mode).
mode).
 A scanning error occurred.
 A scanning error occurred.
- -
Refer to error codes for "**".
Refer to error codes for "**".
 An error occurred in the scanner
 An error occurred in the scanner
- -
unit.
unit.
 An error occurred in the fuser unit
 An error occurred in the fuser unit
when the power switch was turned
when the power switch was turned
ON or sleep mode was ended.
ON or sleep mode was ended.
Rechecking the error after the
Rechecking the error after the
power switch was turned OFF and
power switch was turned OFF and
then ON again because an error
then ON again because an error
was detected in the fuser unit. (This
was detected in the fuser unit. (This
message is displayed for
message is displayed for
approximately 15 minutes when the
approximately 15 minutes when the
machine is restarted after error
machine is restarted after error
code 6901 has occurred.)
code 6901 has occurred.)
Paper size is not set as A4/Letter
Paper size is not set as A4/Letter
when receiving fax.
when receiving fax.
The size of paper set in the paper
The size of paper set in the paper
tray does not match the size
tray does not match the size
specified by the driver.
specified by the
Dot counter or developer roller
Dot counter or developer roller
counter of the toner has reached
counter of the toner has reached
the upper limit (when setting
the upper limit (when setting
continue mode).
continue mode).
Developer roller counter of the
Developer roller counter of the
toner is reaching the upper limit.
toner is reaching the upper limit.
The paper feed sensor detected
The paper feed sensor detected
that the paper was shorter than the
that the paper was shorter than the
specified size.
specified size.
1-19
1-19
Refer
Refer
D D e e s s c c r r i i p p t t i i o o n n
    - -
4C01
4C01
4D01
4D01
    - -
BA00
BA00
BB00
BB00
BD00
BD00
driver.
 
 
to:
to:
4200
4200
B900
B900
6901
6901
6902
6902
8E01
8E01
8E02
8E02
9002
9002
4E01
4E01
4B01
4B01
9601
9601
9608
9608
Confidential 
Confidential 

Advertisement

loading