Brother DCP-1510 Service Manual page 105

7. 7.3 3 ADF u AD
(1 (1) ) Op
(2) Disco (2)
(3) Remove t (3)
(4) Pull out (4)
(5) Remove t (5)
Harness routing: Refer to " Harness routing: Refer to
/ fuser unit (DCP-15** series without fan, MFC-18** series without / fuser unit (DCP-15** series without fan, MFC-18** series without fan)
PCB ASSY / low voltage power supply PCB unit / fuser unit (DCP-15** series with fan, MFC- PCB ASSY / low voltage power supply PCB unit / fuser unit (DCP-15** series with fan, MFC-
18** series with 18** series with fan)
/ fuser unit (DCP-16** series, MFC-19** / fuser unit (DCP-16** series, MFC-19** series)
F uni nit (o t (onl nly f y for or mo mode dels ls wi
Open en th the A e ADF DF un unit it. .
Disconnect th nnect the ADF sen e ADF sensor har sor harness fr
Remove the tapt he taptite cup S M3x ite cup S M3x8 SR screw to r
harness. harness.
Pull out the ADF s the ADF sensor ha ensor harness f
Remove the two ta he two taptite bin ptite bind B M4x12 scr
Taptite bind B M4x12 Taptite bind B M4x12
Main PCB ASSY Main PCB ASSY
" 1. 1. Frame R / main PCB ASSY / low voltage power supply PCB unit Frame R / main PCB ASSY / low voltage power supply PCB unit
fan)" " and " and " 3 3 . . Frame R / main PCB ASSY / low voltage power supply PCB unit Frame R / main PCB ASSY / low voltage power supply PCB unit
2-17 2-17
with th AD ADF u F uni nit) t)
ness from the ma om the main PCB ASS in PCB ASSY Y . .
8 SR screw to release th elease the ground ha
rness from the rom the hole of t hole of the machi he machine.
d B M4x12 screws to rem ews to remove the ADF u
ADF unit ADF unit
Hole Hole
Fig. 2-7 Fig. 2-7
series)" " . .
e ground harness of th rness of the ADF sens e ADF sensor or
ne.
ove the ADF unit from th nit from the machin e machine. e.
ADF sensor harness ADF sensor harness
Ground harness Ground harness
Taptite cup S M3x8 SR Taptite cup S M3x8 SR
ADF sensor harness ADF sensor harness
fan)" " , , " " 2 2 . . Frame R / main Frame R / main
Confidential Confidential