A027 - Replace The Breathing Filter At The Filler Neck Of The Hydraulic Fluid Tank - Index G200.3 Operating Instructions Manual

Maintenance Summary - Care activities
A027 - Replace the breathing filter at the filler neck of the hydraulic fluid tank.
Orientation
Requirement
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
The breathing filter on the oil filler neck of the oil tank must be
Regular regularly replaced depending on the ambient conditions.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Filters are hazardous waste and must be disposed of in a controlled
manner.
It is essential to keep the filter described here in stock. It is not permitted to owner
the machine without this filling and breathing filter.
Use only the original filters according to the spare or wear parts list.
Only filters with retained particle sizes described in the fluid plans
must be used.
11