A145 - Maintenance Of Hsk Clamping Sets (From Berg) - Index G200.3 Operating Instructions Manual

Maintenance Summary - Care activities
A145 - Maintenance of HSK clamping sets (from Berg)
Orientation
Procedure
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
Ensuring that the tools are properly clamped in the tool carrier requires a high level
of cleanliness. The performance and process reliability of the machine are affected
to a large degree by the condition of the clamping devices in the multifunction units
and motor milling spindles.
This includes the cleaning of surfaces and mounting bores on the tool carrier as well
as regular inspection of various wear parts such as O-rings or the like on the HSK
clamping set.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
When ordering spare parts, always note the make, manufacturer
and/or design (latching or non-latching) of the parts currently
installed.
The use of tools with shank ISO 12164-1 version before 2001 or DIN
69893-1 version before 2003 (HSK-A) can cause serious damage to
the tool magazine during automatic tool change and is therefore not
permissible.
Example: HSK clamping sets from Berg
1. Clamping sets from Berg are maintenance-free.
37