C040 - Check And Lubricate Hsk Clamping Set (From Ott-Jakob) - Index G200.3 Operating Instructions Manual

Maintenance Summary - 2.000 Operating hours
C040 - Check and lubricate HSK clamping set (from Ott-Jakob)
Orientation
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
Ensuring that the tools are properly clamped in the tool carrier requires a high level
of cleanliness. Therefore, it is also essential to carry out various maintenance and
servicing activities at shorter time intervals. The performance and process reliability
of the machine are affected to a large degree by the condition of the clamping
devices in the multifunction units and motor milling spindles.
This includes the cleaning of surfaces and mounting bores on the tool carrier as well
as regular inspection of various wear parts such as O-rings or the like on the HSK
clamping set.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Example: Clamping sets from Ott-Jakob
When ordering spare parts, always note the make, manufacturer
and/or design (latching or non-latching) of the parts currently
installed.
The use of tools with shank ISO 12164-1 version before 2001 or DIN
69893-1 version before 2003 (HSK-A) can cause serious damage to
the tool magazine during automatic tool change and is therefore not
permissible.
61