Index G200.3 Operating Instructions Manual page 66

60
in the closing area, the obstacle detection is triggered and the closing
movement must be reversed.
If the obstacle detection does not immediately lead to reversal of the moving
direction, the complete work area door must be checked immediately. The
machine must not be operated any further.
8.
Be sure to contact the INDEX service department or an INDEX
representative.
9.
Example: View of the automatic work area door G420 with drive
1 Drive/deflection pulley
2 Belt
3 Driver
4 Deflection pulley
Visual inspection of the drive of the automatic work area door. This is in
particular an assessment of the toothed belt (2) – condition, tension. Also the
condition of the two deflection pulleys (1+4) and the actuator (3).
Maintenance Summary - 2.000 Operating hours
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022