Njoy UPCMCOP130HBAAZ01B User Manual page 21

03: Output frequency settings
CF 5 00
Hz
OUTPUT
04: ECO enable/disable
ENA
05: ECO voltage range setting
Vac
HLS 23 0
INPUT
06: Bypass enable/disable when UPS is off
ENA
Parameter 2: You may set the initial frequency
on battery mode:
BAT 50: presents output frequency of 50Hz
BAT 60: presents output frequency of 60Hz
If converter mode is enabled, you may choose
the following output frequency:
CF 50: present output frequency is 50Hz
CF 60: present output frequency is 60Hz
Parameter 2: Enable or disable ECO function.
You may choose the following two options:
ENA: ECO mode enable
DIS: ECO mode disable (Default)
Parameter 2: Set the acceptable high
voltage point and low voltage point for ECO
mode by pressing Down key or Up key.
HLS: High loss voltage in ECO mode in
parameter 2.
The setting range in parameter 3 is from +7V
to +24V of the nominal voltage. (Default:
+12V)
LLS: Low loss voltage in ECO mode in
parameter 2.
The setting range in parameter 3 is from -7V
to -24V of the nominal voltage.
(Default: -12V)
Parameter 2: Enable or disable Bypass
function. You may choose the following two
options:
ENA: Bypass enable
DIS: Bypass disable (Default)
21