Njoy UPCMCOP130HBAAZ01B User Manual page 15

Mute and Select buttons simultaneously for 5 seconds. Then the
UPS will enter to bypass mode. This action will be ineffective when
the input voltage is out of acceptable range.
Select + OFF/Enter Button
• Rack or Tower display switch: Press Select and OFF/Enter buttons
simultaneously for 3 seconds. The display change from/to Rack to/
from Tower.
5.2 LCD Panel Indicators
Display
Backup time information
H
M
S
Configuration and fault information
Mute operation
H
M
S
Vac
888 888
Vdc
Hz
INPUT OUTPUT
Function
Indicates the estimated backup time.
H: hours, M: minute, S: second.
Indicates the configuration items, and the configuration
items are listed in details in section 5.5.
Indicates the warning and fault codes, and the codes are
listed in details in section 5.7 and 5.8.
Indicates that the UPS alarm is disabled.
Vac
Vdc
Hz
P1
15