Power Output; Input Voltage - Xantrex Freedom XC 1000 Owner's Manual

Operating in Grid Mode

Power Output

The Freedom XC can deliver up to 1000 watts (Freedom XC 1000)
3
or 2000 watts (Freedom XC 2000) of continuous utility grade sine
wave AC power. The wattage rating applies to resistive loads
such as incandescent lights.
3
As the temperature on the Freedom XC 2000 rises, it will gradually reduce its continuous power output
from 2000 W at 40°C ambient to 1500 W before the over-temperature shutdown occurs at 60°C ambient.
See Specifications on page 83.
66

Input Voltage

The allowable Freedom XC input battery voltage ranges are
shown in the following table:
Table 13 Input battery voltage range
Operating Battery
Condition Voltage
Full
LBCO –
Operating
18.0 volts
Range
Low
< LBCO+0.2
Voltage
volts
Recovery
d
To set LBCO, see Adjusting Settings in Configuration Mode on page 51.
e
To set LBCO Shutdown Delay Timer, see Input Voltage on page 66.
Comment
Assuming the battery is full, the
inverter/charger will operate until
battery voltage goes past below
d
LBCO and LBCO Shutdown
e
delay timer .
Inverter is able to recover and
continue to operate.
Freedom XC Owner's Guide