Assembly - Gold's Gym GGSY24618.0 User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble the weight system, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight system in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight system.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until assembly is finished.
• For help identifying small parts, see page 6.
The Four Stages of the Assembly Process
Frame Assembly—You will begin by assembling
the base and the uprights that form the skeleton of
the weight system.
Arm Assembly—During this stage you will
assemble the arms and the leg lever.
1. Go to my.getgoldsgym.com on your
computer and register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be easier if you have your own
set of wrenches. To avoid damaging parts, do not
use power tools.
Cable Assembly—During this stage you will attach
the cables and pulleys that connect the arms to the
weights.
Seat Assembly—During the final stage you will
assemble the seat and the backrest.
1
8