8. Slide the two Weight Bumpers (27) onto the
Lower Weight Guides (25).
Next, orient eight Weights (22) so that the pin
holes are in the position shown, and slide the
Weights onto the Lower Weight Guides (25).
9. Insert the Weight Selector Cap (23) into the
Weight Selector (24).
Next, orient the Weight Selector (24) so that
the pin is in the position shown, and insert the
Weight Selector into the eight Weights (22).
Orient the remaining Weight (22) so that the
pin hole is in the position shown, and slide the
Weight onto the Lower Weight Guides (25).
8
Pin
Holes
9
12
25
22
27
22
Pin
Pin
Hole
24
25
25
23
22