Gold's Gym GGSY24618.0 User Manual page 14

12. Apply grease to an M10 x 77mm Bolt (79).
Orient the Pivot Frame (5) so that the welded
pins are on the side shown. Attach the Pivot
Frame to the Top Frame (4) with the M10 x
77mm Bolt (79) and an M10 Locknut (56). Do
not overtighten the Locknut; the Pivot Frame
must pivot easily.
Attach the two Arm Pins (40) to the Pivot
Frame (5) with two M4 x 19mm Self-tapping
Screws (69).
Insert the Arm Pins (40) into the two holes in the
Upper Upright (3).
13. Apply grease to an M8 x 50mm Shoulder
Bolt (66).
Attach a Cable Pivot (39) to the Left Arm (10)
with the M8 x 50mm Shoulder Bolt (66) and an
M8 Locknut (58).
Next, wet the inside of a Large Foam Pad (42)
with soapy water. Slide the Large Foam Pad
onto the Left Arm (10).
Then, attach a Handle (11) to the Left Arm (10)
with two M10 x 25mm Screws (77) and two M10
Washers (57).
Assemble the Right Arm (9) in the same way.
12
56
69
5
Grease
40
Pins
13
9
14
4
Holes
79
3
69
40
66
Grease
39
10
58
42
11
57
77