Gold's Gym GGSY24618.0 User Manual page 17

19. Apply grease to an M8 x 20mm Shoulder
Bolt (65).
Attach the Arm Cable (54) to the indicated Cable
Pivot (39) with the M8 x 20mm Shoulder Bolt
(65) and an M8 Locknut (58).
20. See the CABLE DIAGRAM. Identify the Low
Cable (53).
Route the Low Cable (53) through the Leg Lever
(8) and the Front Leg (7). Make sure that the
eyelet end of the Low Cable is in the location
shown.
Attach a Pulley (48) inside the Leg Lever (8),
above the Low Cable (53), with an M10 x 68mm
Bolt (71), two M10 Washers (57), two 13mm
Spacers (52), and an M10 Locknut (56).
21. Attach a Pulley (48) inside the Front Leg (7),
above the Low Cable (53), with an M10 x 68mm
Bolt (71), two M10 Washers (57), two 13mm
Spacers (52), and an M10 Locknut (56).
19
Grease
54
65
20
8
56
57
52
53
Eyelet
21
56
57
52
17
39
58
48
7
57
71
52
48
7
53
57
71
52