Table of Contents
Advertisement
Long term event history
The system stores the last two full triggers in memory. These are not erasable.
Each time the unit sees a full trigger, the older of the two triggers in memory will
be replaced by the new trigger. To access long term event history:
NOTE: The Warning Zone triggers are not stored to memory and will not be
reported.
© 2009 Directed Electronics. All rights reserved.
1.
With the ignition off, press and hold the Valet/Program
switch.
2.
Turn on the ignition.
3.
Release the Valet/Program switch.
4. Press and release the Valet/Program switch within 5 sec-
onds. The LED will flash in groups indicating the last two zones
that triggered the unit. The LED will flash for one minute or until
the ignition is turned off.
55
Advertisement
Table of Contents
Need help?
Do you have a question about the Python 533 and is the answer not in the manual?