System Features Learn Routine - Directed Electronics Python 533 Installation Manual

System features learn routine

The System Features Learn Routine dictates how the unit operates. It is possible to
access and change any of the feature settings using the Valet/program switch.
However, this process can be simplified by using the Bitwriter®. Any of the set-
tings can be changed and then assigned to one of four remote controls. This
feature is called Owner Recognition. Each time that particular remote control is
used to disarm the system, the assigned feature settings will be recalled. Owner
Recognition is only possible when programming the unit via the Bitwriter®.
If programming with the Bitwriter®, the learn routine can be locked or
unlocked. If the learn routine has previously been locked, it must be
unlocked with Bitwriter® - this cannot be done manually with the Valet
switch.
40
1. Open a door. ((The GREEN wire, h1/8, or
the VIOLET, H1/6 must be connected.)
2. Ignition. Turn the ignition on, and then off.
3. Select menu. Press and hold the Valet/Program
switch. When the LED flashes once and the siren chirps,
then Menu 1 has been selected. Continue to hold the
switch until the LED flashes twice and the siren chirps
twice; Menu 2 has now been selected. Release the
switch after the Menu choice has been selected.
© 2009 Directed Electronics. All rights reserved.