HTP Revolution 2500 Manual page 29

Pressing again the button
regulate the Post Gas Flow time.
It works like in MIG 2T/4T.
SETTINGS
From every welding mode, pressing the
button it is possible to go into the settings
menu.
it is possible
REMOTE CONTROL
To select e activate the Remote Control press
the button to go into the settings menu.
With the button
Press the button CHANGE ( Fig.4,ref.11 )
and select AUTO
Then press Home button to come back to the
main screen . Here you will see the Remote
Symbol
SPOOL GUN SETTING
In order to use the SpoolGun the SpoolGun
Kit 601855000L needs to be added.
Press the button
menu.
With the button
Press the button CHANGE ( Fig.4,ref.11 ).
After that next to SpoolGun will appear ON .
If you go on the main page you will the
Spoolgun see Symbol.
select Remote .
to go into the settings
select SpoolGun .