Troubleshooting - Strong SRT 8209 User Manual

Photo Configure
Slide Time
Slide Mode
Movie Configure
Subtitle Specific
Subtitle BG
Subtitle FontColor
PVR Configure
Record Device
Timeshift Size
NOTE:
Format
WARNING:
If you have multiple partitions on your storage device, select the partition you would like to format
and press OK to continue. A confirmation banner will now be displayed. Press OK to start formatting
(or EXIT to cancel it). The format procedure will take some time, depending on the size of the used
storage device. At the end of the process, the "Formatting is complete" message will appear. Press
EXIT twice to exit the menu.
Network Apps
Follow the On-Screen button suggestions to navigate through and edit the Apps.

8.0 TROUBLESHOOTING

There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to
open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.
Setup your preferences for Photo viewing. Press u and photos will be shown
in an automatic slide mode.
Time between advancing to the next photo.
Many different modes can be used, for dissolving to the next photo, defined
by a number. Also, it is possible to select Random order to view the photos.
For Subtitle use in the movie player, setup the features here.
Select either normal, big or small for Subtitle size.
Select the preferred colour of the Subtitle Background.
Select the preferred colour of the Subtitle characters.
For this option to work, you must have a USB device connected.
If your USB device should have more than 1 partition, select the one to use.
Select the amount of free space, to be assigned to the Timeshift function.
Default is 1GB, which would account for around 1 hour of video, depending
on the video format and resolution.
Below this setting information is shown about the current partition or
device.
The use of a USB Hard Disk Drive, already formatted in a PC with FAT32 or
NTFS is recommended.
The format function will delete all data and information from your USB
device or selected partition. Manufacturer will not take any responsibility
for damaged or lost data on the USB device.
Note: These simple network applications will only work if you have set up the
Network Setting in the System menu and have a working connection to the
internet. (Status: Internet)
17