Usb - Strong SRT 8209 User Manual

Restore Factory Default Reset your receiver to the default factory settings. Sometimes useful if the
Information
Software Update
Recall List
Network Setting
MAC Address
Status

7.9 USB

Multimedia
This function allows playback of different kind of files from the connected USB storage device.
Select Music and press OK to playback MP3 files from your folders. Select Photo and press OK to view
your favourite pictures in JPG format. Select Movie and press OK to enter to play a number of video
formats. Select PVR and press OK, and select the HBPVR folder to show the recordings you've made.
The unit supports USB HDD devices with FAT32 format. However, it is possible to use already on a PC
formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the On-Screen
button suggestions and the multimedia buttons like RECALL (Return), u, 3 and 2 on the remote
control to work inside the multi media player.
16
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select System then Restore Factory Default in the main menu and press OK to
select. Enter your password or the DEFAULT password: 1234 and press OK
to confirm. Note: This option will delete all your channels, Favourite lists and
settings. The receiver will reboot and start with the initial Installation menu.
This submenu shows receiver specific information such as hardware and
software version. Please have the Information screen on hand when you call
our hotline. The person who answers your call might ask for the information
given in this screen.
This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software file (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device to
the USB port of the receiver. First a message box will appear that a USB device
is found. Then go to the System menu and select the Software Update option.
Select the correct file in the list. Press OK to start update. When ready, the unit
will reboot automatically.
If set to On, a list of last watched channels will be displayed in viewing mode,
when the RECALL button on the remote control is pressed. Choose the
channel to go back to and press OK. If set to Off, the RECALL button will
instantly return to the previous watched channel.
Setup your Network connection to use the Network Apps.
Link Type is LAN, for use with a wired network to a router/modem on the RJ45
Ethernet port.
IP Setting Press OK to open the submenu.
DHCP If DHCP is set to On, the unit will auto-negotiate with the router/
modem for the correct IP settings, assuming the router/modem also being
set to DHCP On. This is the common default. If you like to use different IP
settings, switch DHCP to Off and to Edit, press GREEN and enter the required
numbers. However, some technical knowledge about TCP/IP protocols is
required.
Information about the unit's unique identification to the LAN port.
Information about the current status of your Ethernet connection.