CyberData 011579 Operation Manual page 57

Web Page Item
Test TLS Connection
Server
Port
List of Trusted CAs
CyberData Corporation
Table 2-13. SSL Configuration Parameters (continued)
Description
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of
some of the web page items. First click on the Toggle Help
button, and you will see a question mark (
some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web
page item.
The ssl test server address as a fully qualified domain name or in
IPv4 dotted decimal notation.
The supported range is 0-65536. SIP connections over TLS to
port 5060 are modified to connect to port 5061. This test button
will do the same.
Use this button to test a TLS connection to a remote server using
the sip client key and password. This will attempt to make a
socket connection to the configured test server and port and
report the success or failure. This can be used to debug TLS
connection issues separate from SIP registration issues.
Use this button to test a TLS connection to a remote server using
the autoprovisioning client key and password. This will attempt to
make a socket connection to the configured test server and port
and report the success or failure. This can be used to debug TLS
connection issues with secure autoprovisioning.
Use this button to select a configuration file to import.
Click Browse to select a CA certificate to import. After selecting
a server certificate authority (CA), click Import CA Certificate to
import it to the list of trusted CAs. CAs are used to validate the
certificate presented by the server when establishing a TLS
connection.
Restore Defaults will restore the default list of registered CAs
and Remove All will remove all registered CAs.
Restore Defaults will restore the default list of registered CAs
and Remove All will remove all registered CAs.
Provides details of the certificate. After clicking on this button, the
Certificate Info Window appears. See
"Certificate Info
931996A
Setting Up the SIP Paging 25V/70V Amplifier
Configure the SSL Parameters
Section 2.6.10.1,
Window".
49
) appear next to
Operations Guide