Table of Contents
Advertisement
TRANSPORT & STORAGE INSTRUCTIONS
The appliance shall be transported and stored in a dry place, and protected from weather effects with
a temperature ranging from -15 to +50 °C. During loading and unloading, the instructions stated on
the packaging shall be observed.
Due to transport and thermal dilatations, excessive enamel may fall off on the bottom of the
receptacle in heaters with exchanger. This phenomenon is very common and has no impact on
the quality and service life of the heater. Decisive is the enamel layer that remains on the
receptacle. DZD has long-term experience with this phenomenon, and it is not a reason for claim.
DISPOSAL
FUNCTIONING PRODUCT
A service fee for providing return and recovery of packaging material has been
paid for the packaging in which the product was delivered. The service fee was
paid pursuant to Act No 477/2001 Coll., as amended, at EKO-KOM a.s. The client
number of the company is F06020274. Take the water boiler packages to a waste
disposal place determined by the town. When the operation terminates,
disassemble and transport the discarded and unserviceable heater to a waste
recycling center (collecting yard), or contact the manufacturer.
5 PRODUCT ACCESSORIES
G 3/4" safety valve is packed with the product and the OKC 100, 125 NTR and OKC NTR/HV types are
additionally equipped with a discharge valve. In the OKC NTR/Z types, the suspension elements and the
temperature indicator are included in the packaging.
It is in your own interest to check the completeness of the accessories.
OF
PACKAGING
MATERIAL
AND
NON-
21-2-2022
- 31 -
Advertisement
Table of Contents
