Delivery Set; Technical Specifications - Vitek VT-8535 Manual Instruction

Recipe Recommended
attachments
Mashed
potatoes
Bread crumbs
Hard cheese
Meat
Nuts
Note: all data in this table are given as recommendations.
CLEANING
ATTENTION! The blades of the chopping knife (7)
are very sharp and may be dangerous. Handle the
chopping knife (7) very carefully!
•
Unplug the unit before cleaning.
•
Remove the attachments. Use a slightly damp
cloth to clean the motor unit (2) and the gears
(5, 8), then wipe them dry.
•
After processing salty or sour products, it is nec-
essary to rinse the blender attachment (1) or the
chopping knife (7) with water immediately.
•
While possessing products with strong dyeing
properties (for instance, carrot or beetroot) the
attachments and bowls can get colored, wipe
the attachments and the bowls with a cloth
dampened in vegetable oil; after that wash the
attachments and bowls with a neutral detergent.
•
Wash the attachments that contacted products
with warm water and a neutral detergent and
dry them thoroughly after use. Wash the whisk
attachment (9) all over and wash only the lower
part of the blender attachment (1).
•
Do not immerse the motor unit (2) and the gears
(5, 8) into any liquids, do not wash them under
water jet or in a dishwashing machine.
IM VT-8535.indd 7
Weight, Cooking method
amount
of products
400 g Cool potatoes and mash
them. You can make mashed
potatoes in the same container
you boiled the potatoes in.
50 g Cut some stale bread and put
it into the chopper bowl, chop
to the desired consistency.
100 g Cut cheese into 1 x 1 cm cubes
and put it into the chopper
bowl, chop to the desired
consistency.
450 g Cut meat into small cubes
and put it into the chopper
bowl, chop to the desired
consistency.
200 g Shell nuts, put them into
the chopper bowl and chop
to the desired consistency.
STORAGE
•
Clean and dry the unit thoroughly before taking
it away for long storage.
•
Do not wind the power cord around the motor
unit (2).
•
Keep the unit out of reach of children and dis-
abled persons.

DELIVERY SET

Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk attachment – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1 pc.
Measuring cup – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 400 W
Maximal power: 900 W
7
ENGLISH
Approximate
time
of readiness
30 sec.
30 sec.
30 sec.
10 sec.
30 sec.
29.10.2018 16:58:34