Delivery Set; Technical Specifications - Vitek VT-1478 Manual Instruction

Wash the whisk attachment (10) all over
•
and wash only the lower part of the blender
attachment (1).
Do not immerse the motor unit (3) and the
•
gears (6, 9) into any liquids, do not wash
them under water jet or in a dishwashing
machine.
Do not use abrasive cleaners or solvents to
•
clean the blender set.
STORAGE
Clean and dry the unit thoroughly before
•
taking it away for long storage.
Do not wind the power cord around the
•
motor unit (3).
Keep the blender set in a dry cool place out
•
of reach of children and disabled persons.

DELIVERY SET

Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk attachment – 1 pc.
Geared lid – 1 pc.
Knife – 1 pc.
Chopper bowl – 1 pc.
Сup – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 300 W
Maximal power: 1000 W
Capacity of the chopper bowl: 300 ml
Capacity of the cup: 600 ml
The manufacturer preserves the right to
change design, structure and specifications
not affecting general principles of the unit
operation without a preliminary notification
due to which insignificant differences between
the manual and product may be observed.
If the user reveals such differences, please
report them via e-mail info@vitek.ru for receipt
of an updated manual.
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of
the unit is subject to mandatory collection and
consequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administra-
tion, a disposal service or to the shop where
you purchased this product.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
13
ENGLISH