Table of Contents
Advertisement
D-1
MAINTENANCE
D-1
CLEANING & MAINTENANCE
FMD
Taking proper care of the FMD (Face Mounted
Display) is important for optimal functioning of the
equipment. Occasionally, the FMD lens should be
wiped with the lint free lens wipe that is provided.
This can be done to remove fingerprints from the lens-
es. You can also use a lens cloth (e.g., from a cam-
era shop). Paper towels or household cloths may
scratch or damage the lenses and should not be used.
Avoid exposing the FMD to liquids. Cleaning solu-
tions should not be used to clean the FMD. Do not
use Isopropyl alcohol or solutions containing alcohol
to clean the lenses or plastic parts on the FMD. You
can also use a camera pressure canister to occasion-
ally blow out dirt.
You may want to clean the inside of the helmet occa-
sionally. Be sure to do so without exposing the FMD
to any unacceptable materials, as explained above.
The FMD should be kept in a clean and dry location
out of direct sunlight. Avoid dirty or sandy environ-
ments, as these can lead to scratching of optics and
damage the FMD mechanical adjus
ents.
®
Monitor
CAUTION
The monitor is not a touch screen and can be
damaged by touching or poking it with any object.
Use care when cleaning screen. Use only a soft
dry cloth (cotton or flannel). Avoid chemicals and
solvents (alcohol, benzine, acidic or alcazine sol-
vent cleaners). Avoid granular or abrasive clean-
ing agents.
VRTEX
360
®
Advertisement
Table of Contents
