Table of Contents
Advertisement
B-7
Login Screen:
Overview
This page allows the user to:
• Enter Username
• Select Language Preference "Orange Button"
• Select Imperial or Metric Units "Blue Button"
• Shutdown System "Red Menu Button"
• Continue to the next Setup Screen "Green Button"
• Theory "Yellow Button"
1. On Screen Keyboard
The user enters their name by using the joystick and
red select button on the VR weld machine. The joy-
stick allows the user to navigate the keyboard graphic
to highlight letters. Pressing the red select button
enters the letter highlighted into the enter name box
as indicated. The virtual keyboard starts with shift
enabled, so the first letter is automatically capitalized.
The user can select shift or lock (equivalent to caps
lock on a standard keyboard) at any time. If the user
makes a mistake, they can select the back arrow to
delete the last character entered.
LOGIN SCREEN
2. Language
Selecting the orange language menu button brings up
the list of languages the software supports. Use the
joystick to highlight the desired language.
Press the red select button to accept.
MEASUREMENT UNITS
Coupon Thickness
Gas Flow Rate
Wire Feed Speed
Weldometer™ - Base Metal
Weldometer™ - Gas
Weldometer™ - Consumables
OPERATION
Press the orange language menu button again to exit
the language menu. The system stores the language
selection and will automatically start up in the same lan-
guage the next time.
3. Measurement Units
The blue unit menu button brings up the measurement
system. Use the joystick to highlight the desired unit of
measurement. Press the red select button to accept.
Press the blue button again to exit the measurement
unit menu. Selecting Metric or Imperial converts the
user interface into the corresponding measurement sys-
tem. The system stores the measurement selection, so
it will automatically start up in the same unit of measure-
ment the next time. The system uses the units shown
in Table B.1.
4. Menu
The red menu button allows the student to shut down
the system. If the user selects shutdown, a submenu
appears asking the user if they are sure that they want
to shut down the system. This prompt prevents the
user from accidentally shutting down the system. If the
user selects "Yes", the VRTEX
THIS METHOD SHOULD ALWAYS BE USED TO
SHUT DOWN THE VRTEX
could cause damage to the system.
5. Continue
After the user enters their name and all selections out-
lines above have been made, the green panel button is
pressed to continue to set up process.
6. USB Indicator
The circular USB icon in the upper right corner of the
screen indicates the presence of a USB memory stick in
the front of the machine. A translucent icon indicates no
USB memory stick is present. A green icon indicates a
USB memory stick is in place in the front of the
machine.
TABLE B.1
Imperial
Abbrev.
Details
inches
in.
cubic feet per minute
CFM
inch per minute
IPM
lbs
pounds
CF
cubic feet
lbs
pounds
VRTEX
360
®
360 will shut down.
®
CAUTION
360. Failure to do this
®
Metric
Abbrev.
Details
millimeters
mm
LPM
liters per minute
meters per minute
MPM
kg
kilograms
L
liters
kilograms
kg
B-7
Advertisement
Table of Contents
