Table of Contents
Advertisement
B-38
Advanced:
The "Advanced" Learning Level is designed to be the
most challenging. This level is for the student that has
more welding experience. This level is the most chal-
lenging and hardest level to score well in. The toler-
ances are set very close forcing the user to almost
perfect the angles, distance and motion of the welds.
Advanced Tolerance Setting
Accessing the Learning Levels:
From the "Sign In" screen, turn the Instructors Key
one quarter turn to the right. Once in the Instructors
Mode use the joystick right motion to highlight the
"Tolerance" block and press the red "Select" button.
The Tolerance Selection Box will appear below the
Tolerance block. Use the joystick left and right motion
to toggle through the available Learning Levels.
Selecting a Learning Level:
Once "Tolerance" has been selected using the red
Select button, use the joystick to toggle between the
different Learning Levels. In the Tolerance Selection
Box there will be four options that have an image of a
lock next to them. The lock indicates the tolerance
cannot be changed. The four tolerances are "Default,
Entry Level, Intermediate and Advanced." Use the red
"Select" button to activate the Learning Level desired.
Upon selection, a prompt box will appear asking if the
selection is the intended tolerance level desired.
Press the red "Select" button again setting the chosen
Learning Level.
OPERATION
Any additional tolerance settings that have been cre-
ated by the user will also appear in this box. Those
tolerance settings can still be accessed and changed
as the user deems necessary. The "Learning Levels"
are designed to teach student progression starting
with the "Entry Level" and progressing through the
"Intermediate" and "Advanced" levels until they
become proficient with the welding movements.
Exiting the Learning Levels:
Once the user has chosen the Learning Level, press
the orange "Back" button located on the colored but-
ton bar two times. This will take the program back to
the "Sign In" screen. Follow the setup procedures to
begin the learning experience.
VRTEX
®
360
B-38
Advertisement
Table of Contents
