Lincoln Electric VRTEX 360 AD1332-1 Operator's Manual page 47

B-30
EXITING THE BEND TEST:
To exit the bend test application, press the red MENU
button and use the joystick to toggle to YES then
press the red SELECT button. This will take the user
back to the LASER screen.
PRESS RED MENU BUTTON TO EXIT
ARE YOU SURE PRESS YES RED SELECT BUTTON
OPERATION
THE CERTIFICATE:
The BEND TEST CERTIFICATE is located in the
STUDENT REPORT, which can be saved and
accessed if there is a USB memory device in the USB
slot on the front of the VRTEX
the virtual bend test procedure.
Sample A Root Bend and B Face Bend Guided Results
VRTEX 360
®
360 while performing
®
Bend Test Certificate
B-30