Table of Contents
Advertisement
B-15
New Coupon
Pressing the blue new coupon menu button instantly
replaces the current coupon with a fresh, unwelded
coupon. Note that this is a quick way to start over on
the same configuration and process but that it will
remove all passes from the coupon and the graphs on
the LASER screen.
White Screen Select Arrows
Pressing the white screen select arrows allow the user
to rotate through the LASER screen, instructorʼs view
and welderʼs view.
Welderʼs View screen
Overview
This screen shows the virtual view as seen by the
user wearing the helmet.
Instructorʼs View screen
Overview
This screen shows the coupon and virtual weld in real
time. An observer can rotate and/or zoom in or out on
the coupon.
This view also shows the VR
GMAW/FCAW gun or VR SMAW device being used.
Move the joystick to rotate the coupon. Press the red
select button to toggle the joystick from rotate to zoom
mode. Use the joystick to zoom in and out when in
zoom mode.
NOTE: Changing views on the monitor does not
change the userʼs view in the helmet.
INSTRUCTORS VIEW (POOR WELD)
OPERATION
LASER SCREEN
(Live Action Student Evaluation Report)
Overview
This screen summarizes the studentʼs welding perfor-
mance. Detailed information about the studentʼs
welding technique for each pass are displayed on this
screen.
LASER SCREEN (GOOD WELD)
LASER SCREEN (HORIZONTAL WELD)
LASER SCREEN (GOOD VERTICAL WELD)
VRTEX
360
®
NO WELD
B-15
Advertisement
Table of Contents
