KYMCO FILLY LX 50 Service Manual page 134

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Install the return spring by aligning the spring
hook end with the hole in the brake panel.
Apply a small amount of engine oil to the felt
seal and install it to the brake panel.
Install the wear indicator plate on the brake
cam by aligning the tooth on the plate with
the groove on the brake cam.
Install the brake arm on the brake cam by
aligning the punch mark on the brake arm and
the scribed line on the brake cam.
Install and tighten the brake arm bolt.
Torque:0.8~1.2kgf-m
Install the brake shoe springs to the brake
shoes and then install the brake shoes into the
brake panel.
INSTALLATION
Install the brake panel onto the front wheel.
Install the front wheel. ( 12-7)
Adjust the front brake lever free play.
Wear Indicator Plate
12-9
Brake Cam
Bolt
Brake Shoe Springs
Brake Shoes
FILLY LX 50
Return Spring
Brake Arm