KYMCO FILLY LX 50 Service Manual page 33

2
. FRAME COVERS/EXHAUST MUFFLER
FRONT TOOL BOX REMOVAL
Remove the handlebar front/rear cover.
Remove the two bolts on the front of the floor
board.
Remove the bolt attaching the front tool box.
Remove the ignition switch decorative ring
and the fuel filler decorative ring before
removing the front tool box.
Remove the fule filler control wire.
Remove the front tool box.
F RONT/REAR FENDER REMOVAL
FRONT FENDER
Remove the speedometer wire.
Remove the two bolts attaching the front
fender bracket.
Remove the front fender.
EXHAUST MUFFLER REMOVAL
Remove the two exhaust muffler joint lock
nuts.
Remove the two exhaust muffler lock bolts.
Remove the exhaust muffler.
Remove the exhaust muffler joint packing
collar.
When installing, first install the exhaust
muffler packing collar and then install the
exhaust muffler.
First install and tighten the exhaust muffler
joint lock nuts. Then, install and tighten the
exhaust muffler lock bolts.
Torques:
Exhaust muffler lock bolt:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
Be sure to install a new exhaust muffler
packing collar.
Ignition Switch
2-5
Decorative Ring
Screw
Tool Box
3.0~3.6kgf-m
Fuel Filler Decorative Ring
Bolt
Front Fender
Bolts
Lock Nut
FILLY LX 50
Tool Box
Bolt
Bolts