KYMCO FILLY LX 50 Service Manual page 132

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Apply grease to a new dust seal lip and install
the dust seal.
Install the side collar.
INSTALLATION
Install the front wheel by aligning the brake
panel groove with the front fork tab.
Insert the axle shaft and tighten the axle nut.
Torque: 4.5kg-m
Connect the speedometer cable and secure it
with the screw.
Install the front brake cable and adjust the
front brake lever free play.
FRONT BRAKE
Remove the front wheel. ( 12-4)
Remove the front brake panel.
INSPECTION
Measure the brake drum I.D.
Service Limit: 111mm replace if over
Measure each brake lining thickness.
Service Limit: 2.00mmmm replace if below
Keep oil or grease off the brake linings.
12-7
Side Collar
Dust Seal
Groove
Brake Shoe Springs
Brake Linings
FILLY LX 50
Tab
Brake Cam