KYMCO FILLY LX 50 Service Manual page 103

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
DRIVE BELT
REMOVAL
Remove the left crankcase cover.
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 16.5mm
REPLACEMENT
Remove the eight left crankcase cover bolts
and left crankcase cover. ( 9-2)
Hold the clutch outer with an universal holder
and remove the clutch outer nut.
Special
Universal Holder
Hold the drive pulley using a holder and
remove the drive face nut, starting ratchet and
washer.
Remove the drive pulley face.
Remove the drive belt from the clutch/driven
pulley.
9-5
Clutch Outer
Universal Holder
Drive Pulley Face
Clutch/Driven Pulley
FILLY LX 50
Nut
Drive Face Nut