KYMCO FILLY LX 50 Service Manual page 150

13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR WHEEL
REMOVAL
Remove the exhaust muffler. ( 2-5)
Remove the rear axle nut to remove the rear
wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limits: 111mm replace if over
INSTALLATION
Install the rear wheel in the reverse order of
removal.
Tighten the rear axle nut.
Torque: 11.0-13.0kg-m
Install the exhaust muffler.
Torque:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
Exhaust muffler lock bolt: 3.0~3.6kgf-m
First install and tighten the exhaust
muffler joint lock nuts and then the
exhaust muffler lock bolts.
Rear Axle Nut
FILLY LX 50
13-2