KYMCO FILLY LX 50 Service Manual page 30

2
. FRAME COVERS/EXHAUST MUFFLER
FRAME COVERS
FRONT UPPER COVER REMOVAL
Remove the screw on the front of the front
upper cover.
Remove the four screws on the back of the
front upper cover.
Remove the front upper cover.
The installation sequence is the reverse of
removal.
FRONT LOWER COVER REMOVAL
Remove the right and left side covers. ( 2-4)
Remove the front wheel. ( 12-4)
Remove the two screws attaching the front
lower cover.
Remove the four screws on the back of the
front lower cover.
Remove the front lower cover
The installation sequence is the reverse of
removal.
During front wheel removal, support the
motorcycle to prevent it from falling down.
HANDLEBAR FRONT/REAR COVER
REMOVAL
HANDLEBAR FRONT COVER REMOVAL
Remove the handlebar front cover screw.
Remove the two screws attaching the
handlebar rear cover.
Disconnect the headlight wire connector and
remove the handlebar front cover.
HANDLEBAR REAR COVER REMOVAL
Disconnect the speedometer cable, right and
left handlebar switch couplers, and the stop
switch wire connectors.
Remove the bolt attaching the handlebar rear
cover.
Remove two screws inside the handlebar rear
cover and remove the handlebar rear cover.
The installation sequence is the reverse of
removal.
Screw
Front Upper Cover
Screws
Front Lower Cover
Handlebar Front Cover
Screw
Head Light
Bolt
FILLY LX 50
Screws
Front Tool Box
Screws
Screws
Handlebar Rear Cover
Handlebar Front Cover
2-2