Connecting The Ac Power Cord; Lmd-X310S; Lmd-X550S - Sony LMD-X550S Instructions For Use Manual

Connecting the AC Power
Cord

LMD-X310S

1
Make sure that the
standby state).
2
Insert the DC connector to the DC 26 V input
connector of the rear panel until it locks.
3
Plug the AC power cord into the AC IN connector
of the AC adaptor and attach the AC power plug
holder to the AC power cord.
AC IN connector
4
Insert the AC power plug holder until the fixing
lever locks.
switch is set to (in a
AC power cord
AC power plug holder
5
Connect the plug of the AC power cord to an AC
outlet.
To remove the AC power cord
Press the switch to the
the standby state, then remove the AC power cord from
the AC power plug holder by holding the fixing levers of
the holder from both sides to release the lock. Then,
remove the DC connector from the unit.

LMD-X550S

1
Make sure that the
standby state).
2
Insert the AC power cord to the AC input connector
of the rear panel and attach the AC power plug
holder to the AC power cord.
AC input
connector
AC power cord
AC power plug
holder
3
Insert the AC power plug holder until the fixing
lever locks.
side and switch the unit to
switch is set to (in a

Connecting the AC Power Cord

17