Table of Contents
Advertisement
Location and Function of Parts and Controls
Front Panel
Power indicator
When the power is turned on, the power indicator lights
in green.
When the protection function is activated and the
display brightness is reduced due to the rise in
temperature, it flashes in amber.
CONTROL button
Displays or clears the operating buttons on the front
panel.
Selects the items depending on the menu types.
OSD menu operation buttons
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
/// buttons
Press to select the items and setting values.
CUSTOM button
Turns on or off the assigned function. You can adjust the
assigned function by pressing the / buttons. (Refer to
the custom buttons of the system configuration menu on
page 25 and of the default setting on page 26.)
A.I.M.E. button
1)
Sets the A.I.M.E.
function to Off and On. When the
A.I.M.E. function is set to On, A.I.M.E. Structure and
A.I.M.E. Color can be adjusted.
1) A.I.M.E.: Enables better image reproduction and display.
2 or 3 screen display setting buttons
PIP/POP: For displaying the 2 or 3 screen display
or switching the 2 or 3 screen display mode.
SWAP: For swapping between the main display
and the sub display.
Input select buttons
PORT A: Displays the input signal assigned to
PORT A. When the input signal of PORT A is
displayed, a menu which allows you to select the input
signal to be assigned to PORT A is displayed.
PORT B: Displays the input signal assigned to
PORT B. When the input signal of PORT B is
displayed, a menu which allows you to select the input
signal to be assigned to PORT B is displayed.
(ON/STANDBY) switch
Location and Function of Parts and Controls
13
Advertisement
Table of Contents
