9 SERVICE SCHEDULE
Service the fork.
Perform the shock absorber service.
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Make a service entry in the KTM Dealer.net.
○
One-time interval
●
Periodic interval
9.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Service the fork.
Perform the shock absorber service.
Check/adjust the carburetor components.
Perform minor engine service. (Check the inlet membrane. Check the clutch. Under
difficult operating conditions: Change the piston and check the cylinder and Z dimen-
sion.)
Perform the intermediate engine service. (Change the piston. Check the cylinder and Z
dimension. Check the exhaust control for functioning and smooth operation.)
Perform major engine service including removing and installing engine. (Change the con-
necting rod, conrod bearing, and crank pin. Check the transmission and shift mecha-
nism. Change all engine bearings.)
○
One-time interval
●
Periodic interval
32
Recommended work
(
(
Once after 10 operating hours / Every 10 operating hours
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours / Every 10 operating hours
p. 70)
p. 53)
after every race
Every 40 operating hours
Every 20 operating hours
●
●
○
●
●
○
●
●
○
●
●
○
●
●
after every race
Every 40 operating hours
every 12 months
●
●
●
●
●
●
○
○
●
●
●
●
●
●
●
●
●
●
●
●
●