Luna With Uf1 - Tutorial; Ssl 360° Setup; Luna Setup - Solid State Logic SSL UF1 User Manual

LUNA Tutorial

LUNA with UF1 - Tutorial

The following tutorial guides you through configuring and using the default LUNA profile on LAYER 1 of UF1. If you wish to configure
LUNA on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is configured
for the correct SSL V-MIDI ports..
SSL 360° Setup
1. Open the SSL 360° application on your computer. Go to the HOME page and check that your UF1 has been detected by SSL
360°.
2. Go to the UF1 page and set Layer 1 to LUNA using the drop-down list. If LUNA is not available from the drop-down list it is
because you have not configured it as DAW 1 on the
STEP 1 : Open SSL 360° application.
Check your UF1 has been detected.

LUNA Setup

3. Open the LUNA sidebar by clicking the UA diamond logo on the left of the screen, and clicking Settings, or choose LUNA >
Preferences from the app menu. Click Controllers.
4. In one of the MIDI Control Surface rows, click under Input Device and select SSL V-MIDI Port 1 Source and under Output
Device select SSL V-MIDI Port 1 Destination.
5. Select the box in the ON column to enable the control surface.
6. Configure LUNA's MCU options as you desire, such as SURFACE SHOWS TRACKS FROM, BANK TO SELECTED TRACK,
SCROLL LUNA WHEN BANKING etc.
96
CONTROL SETUP page - ensure you do this first.
STEP 2 : Select the default LUNA
DAW profile from the UF1 page.
SSL UF1 User Guide