Ableton Live With Uf1 - Tutorial; Ssl 360° Setup; Live Setup - Solid State Logic SSL UF1 User Manual

Live Tutorial

Ableton Live with UF1 - Tutorial

The following tutorial guides you through configuring and using the default Ableton Live profile on LAYER 1 of UF1. If you wish
to configure Live on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is
configured for the correct SSL V-MIDI ports..
SSL 360° Setup
1. Open the SSL 360° application on your Mac or Windows computer. Go to the HOME page and check that your UF1 has been
detected by SSL 360°.
2. Go to the UF1 page and set Layer 1 to Ableton Live using the drop-down list. If Live is not available from the drop-down list
it is because you have not configured it as DAW 1 on the
STEP 1 : Open SSL 360° application.
Check your UF1 has been detected

Live Setup

3. Open Live. Go to Preferences > Link MIDI...
4. From the Control Surface drop-down list select MackieControl. Set the Input to SSL V-MIDI Port 1 Source and set Output
to SSL V-MIDI Port 1 Destination.
STEP 3 : Go the Preferences menu
and click on the Link MIDI tab.
70
CONTROL SETUP page - ensure you do this first.
STEP 2 : Select the default Ableton
Live DAW profile from the UF1 page.
STEP 4 : Add a MackieControl and
configure for SSL V-MIDI Port 1 on
Input and Output
SSL UF1 User Guide