Control Setup Page - Solid State Logic SSL UF1 User Manual

Product Overview & Features

Control Setup Page

DAW Configuration
The CONTROL SETUP page in SSL 360° allows you to nominate up to 3 different DAWs for use with UF1. In the DAW
CONFIGURATION section, select up to 3 DAWs using the drop-down lists. In the example pictured below, DAW 1 is set to Pro
Tools, DAW 2 is set to Logic Pro and DAW 3 is set to Cubase. Once you have nominated the DAW(s) on this page, they will become
available for you to assign to each UF1 Layer on the UF1 Page (covered in more detail on the following pages).
DAW 1 (LAYER 1): SSL V-MIDI Ports 1-4
DAW 2 (LAYER 2): SSL V-MIDI Ports 5-8
DAW 3 (LAYER 3): SSL V-MIDI Ports 9-12
Select your DAW from the drop-down list, starting with DAW 1. If you only use 1 DAW then leave DAW 2 and DAW 3 set to 'None'.
DAW drop-down list
Plug-in Mixer Transport
When a UF1 layer is set to control the SSL 360° Plug-in Mixer, the
transport keys on the bottom of UF1 and the jog wheel will operate the
DAW's Transport commands. The DAW that drives (the one that is
linked to) these buttons on UF1 must be selected from the drop-down
list here. You'll be able to choose from any of the 3 DAWs you have
nominated in the DAW CONFIGURATION section.
SSL UF1 User Guide
20