Table of Contents
Advertisement
Cameleon Flood 15 Q4
3. DMX Address/ DMX Configuration
With this menu you can set the device's DMX starting address and choose a DMX channel mode.
01) While in the main menu, press the UP/DOWN buttons to choose DMX.
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose between Address or Channels.
04) Once you have chosen Address, press the SET button to open the submenu.
05) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001-
512.
06) Once you have chosen Channels, press the SET button to open the submenu.
07) Press the UP/DOWN buttons to choose 4, 6 or 10 DMX channels.
4. Master/slave
With this menu, you can set the device as a slave.
01) While in the main menu, press the UP/DOWN buttons to choose Slave.
02) The device is now operating in Slave Mode. It means that it will react the same as the master device.
5. Manual Color mode
With this menu you can set the static colors.
01)
While in main menu, press the UP/DOWN buttons
02)
Press the SET button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the static colors Red, Green, Blue and White.
04)
Once you have chosen the desired color with the UP/DOWN buttons , press the SET button to adjust
the color intensity. The adjustment range is between 0-255, from dark to brightest. You can set this
with the UP/DOWN buttons.
Ordercode: 42671
to choose
Manual.
16
Advertisement
Table of Contents
