Table of Contents
Advertisement
EventSpot 1600 Q4 Set
Press the power button (05) and hold down the power button (G) for at least 3 sec. to activate the
EventSpot! The EventSpot will show the current software version, battery energy level, current temperature
and type of DMX signal at start-up!
Main Menu Options
01) Press the MODE or SET button to open the main menu.
02) Press the UP/DOWN buttons to scroll through the menu. The display will show:
03) Press the SET button to open the desired menu.
04) Press the MODE button to return to the previous menu.
1. DMX Address/DMX Configuration/DMX signal
In this menu you can set the device's DMX starting address, choose a DMX channel mode or set the DMX
signal options.
01) In main menu, press the UP/DOWN buttons until the display shows DMX.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to set the DMX address, the desired configuration and activate DMX or
W-DMX mode.
04) If you have chosen DMX Address 001 , press the SET button to open the submenu.
05) Press the UP/DOWN buttons to set the desired address. The adjustment range is between 001–512.
06) If you have chosen Channels, press the SET button to open the submenu.
07) Press the UP/DOWN buttons to choose between:
4 Channels
6 Channels
10 Channels
08) If you choose Signal, press the SET button to open the submenu:
09) Press the UP/DOWN buttons to select normal DMX or wireless DMX mode.
10) Press the SET button to confirm your choice.
Ordercode: 44057
20
Advertisement
Table of Contents
