Dmx Fail; Dmx Sync; Lock; Factory - SHOWTEC Cameleon Flood 15 Q4 V4 Manual

Cameleon Flood 15 Q4

6.3. Dmx Fail

With this menu, you can adjust the behaviour of the device in case of a DMX signal error .
01) While in Settings menu, press the UP/DOWN buttons to choose Dmx Fail.
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose the desired option.
04) You can choose between Off and Hold.
I f you have chosen Off, the device will blackout its output, when a DMX signal error occurs.
05)
06) If you have chosen Hold, the device will fall back on the last properly working DMX signal from before the
DMX signal error, which ensures undisrupted performance.

6.4. Dmx Sync

With this menu, you can set the DMX synchronisation of the device.
01) While in Settings menu, press the UP/DOWN buttons to choose Dmx Sync.
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose the desired option.
04) You can choose between On and Off.
05) The Sync option is a tool which helps to keep multiple fixtures synchronized, when using them in
master slave mode.
06) When you choose On the synchronisation function is activated.

6.5. Lock

With this menu you can select whether the safety lock is active.
01) While in Settings menu, press the UP/DOWN buttons to choose Lock.
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose the desired option.
04) You can choose between Yes and No.
05) If you have chosen Yes and confirm it with the SET button, after 35 seconds the device will be in Lock
mode. You will need to insert the password in order to access the main menu. Press the MODE and
SET button simultaneously for 3 seconds, and you will be able to access the main menu.
06) If you have chosen No, the main menu will remain unlocked.

6.6. Factory

With this menu, you can reset to the default settings.
01) While in Settings menu, press the UP/DOWN buttons to choose Factory.
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose the desired option.
04) You can choose between Yes and No.
05) If you have chosen Yes and confirm it with the SET button, the device will be reset to default settings.
06) The device will return to the built-in Auto program.

7. Information

With this menu you can view the currently installed software version, temperature and device code.
01) While in main menu, press the UP/DOWN buttons
02) Press the SET button to open the menu.
03) You can now view the currently installed software version, temperature and device code.
Ordercode: 42671
to choose Information.
18