Related Manuals for SHOWTEC 42668
Summary of Contents for SHOWTEC 42668
- Page 1 USER MANUAL ENGLISH Cameleon Bar 15 Q6 Tour Product code: 42668 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Cameleon Bar 15 Q6 Tour Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Control Modes ..............................18 Control Panel ..............................19 Start-up ................................19 Menu Overview ..............................20 Main Menu Options ............................22 DMX Settings ............................22 Address ..............................23 Channels ..............................23 Manual Mode ............................23 Auto................................24 Program ..............................24 Program 01 ............................25 Programs 02–16 ...........................25 Master/Slave Mode ..........................25 Settings ..............................26 Product code: 42668... - Page 4 Preventive Maintenance ..........................37 Basic Cleaning Instructions ........................37 Draining Condensation Water ......................38 Corrective Maintenance ..........................38 Deinstallation, Transportation and Storage ....................39 Instructions for Deinstallation ..........................39 Instructions for Transportation ........................39 Storage ................................39 10. Disposal ................................39 11. Approval ................................39 Product code: 42668...
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Cameleon Bar 15 Q6 Tour ● Schuko to Power Pro True cable (1,5 m) ●... -
Page 6: Symbols And Signal Words
The information label contains the following symbols: This device shall not be treated as household waste. This device is rated IP65. This device falls under IEC protection class I. Read the user manual supplied with the device. Product code: 42668... -
Page 7: Safety
Keep the connectors sealed with the rubber caps when the connectors are not in use. ● Do not connect the cables from above the connectors, if the device is installed outdoors. Make a ‘drip loop’ in the cable so that rain water cannot enter the device. Product code: 42668... - Page 8 Let the device reach room temperature before switching it on, otherwise it may be damaged by the formed condensation. ● If the device fails to work properly, discontinue the use immediately. Attention For professional use only This device shall be used only for the purposes it is designed for. Product code: 42668...
-
Page 9: Requirements For The User
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device. Product code: 42668... -
Page 10: Description Of The Device
Cameleon Bar 15 Q6 Tour Description of the Device The Showtec Cameleon Bar 15 Q6 Tour is an IP65-rated outdoor wall washer. It is equipped with 15 x 10 W 6-in-1 RGBWA-UV LEDs. 3.1. Front View Fig. 02 15 x 10 W 6-in-1 RGBWA-UV LEDs... -
Page 11: Product Specifications
Maximum housing temperature t 70 °C Minimum distance: Minimum distance from flammable surfaces: Minimum distance to lighted object: 0,5 m Optional Accessories You can additionally purchase the following accessories: Product code: 44002 (Showtec UR-5 Universal IR Remote) Product code: 42668... -
Page 12: Dimensions
Cameleon Bar 15 Q6 Tour Dimensions Fig. 04 Product code: 42668... -
Page 13: Installation
The minimum distance between the light output and the illuminated surface must be bigger than 0,5 m. ● The maximum ambient temperature t = 40 °C must never be exceeded. ● The relative humidity must not exceed 50 % with an ambient temperature of 40 °C. Product code: 42668... -
Page 14: Rigging
(10), as shown in Fig. 05. Fig. 05 Angle Adjustment You can adjust the angle of the device. Tilt the device to the desired angle (see Fig. 06). The tilt range is <90°. Fig. 06 Product code: 42668... -
Page 15: Connecting To Power Supply
● Do not link more devices on one power link than the maximum recommended number. Maximum recommended number of devices: ● at 100–120 V: 11 devices ● at 200–240 V: 22 devices Product code: 42668... -
Page 16: Setup
In order to connect more than 32 devices on one data link, you must use a DMX optically isolated splitter/booster, otherwise this may result in deterioration of the DMX signal. Note: ● Maximum recommended DMX data link distance: 300 m ● Maximum recommended number of devices on a DMX data link: 32 devices Product code: 42668... -
Page 17: Dmx Cables
04) Set the first device on the data link as a master device. See 6.6.5. Master/Slave Mode on page 25 for more information. 05) Set the remaining devices to slave mode. See 6.6.5. Master/Slave Mode on page 25 for more information. Fig. 08 Product code: 42668... -
Page 18: Dmx Linking
04) Continue assigning the starting addresses of the remaining devices by adding each time 12 to the previous number. Make sure that you do not have any overlapping channels in order to control the Cameleon Bar 15 Q6 Tour correctly. If two or more devices are addressed similarly, they will work similarly. Product code: 42668... -
Page 19: Operation
01) Set the DMX starting address of the device in Address menu. See 5.3.5. DMX Addressing on page 17 and 6.6.1.1. Address on page 23. 02) Select the DMX channel mode. See 6.6.1.2. Channels on page 23 for more information. See 6.7. DMX Channels on pages 29–30 for complete overview of all DMX channels. Product code: 42668... -
Page 20: Control Panel
By default the display is locked. To access the main menu, you need to enter the password. Touch and hold the MODE and SET buttons for 3 seconds to unlock the display. See 6.6.6.5. Lock on page 28 for more information. Product code: 42668... -
Page 21: Menu Overview
Cameleon Bar 15 Q6 Tour Menu Overview Product code: 42668... - Page 22 Cameleon Bar 15 Q6 Tour Product code: 42668...
-
Page 23: Main Menu Options
02) Touch the SET button to enter the menu. The display will show: Touch the UP/DOWN buttons to select one of the 2 submenus: ● ADDRESS ● CHANNELS Touch the SET button to open the desired submenu. Product code: 42668... -
Page 24: Address
Touch the UP/DOWN buttons to set the LED brightness. The adjustment range for each color is 0–255, from dark to brightest. Touch the SET button to save your settings. You can combine Red, Green, Blue, White, Amber and UV to create an infinite range of colors (0–255). Product code: 42668... -
Page 25: Auto
03) Touch the UP/DOWN buttons to choose MODE and touch the SET button to enter the menu. The display will show: 04) Touch the UP/DOWN buttons to choose one of the 16 built-in programs. Touch the SET button to confirm your choice. Product code: 42668... -
Page 26: Programs 02-16
03) Touch the UP/DOWN buttons to choose YES or NO. 04) Touch the SET button to confirm your choice. 05) If you have chosen YES, the device will be set as a slave and will react the same as the master device. Product code: 42668... -
Page 27: Settings
04) Touch the SET button to enter the desired submenu. Curves Select In this menu you can set the dimming curves. 01) Touch the UP/DOWN buttons to choose one of the 4 dimming curves. 02) Touch the SET button to confirm your choice. Product code: 42668... -
Page 28: Dimmer Speed
In this menu you can set the devices’ behavior, while using multiple Cameleons. 01) Touch the UP/DOWN buttons to select ON (all Cameleons will simultaneously perform the same action, without any delays) or OFF (risk of random delays). 02) Touch the SET button to confirm your choice. Product code: 42668... -
Page 29: Lock
In this menu you can view the device’s current software version, temperature, total lifetime and the UID (device’s RDM code). 01) While in the main menu, touch the UP/DOWN buttons to choose INFORMATION. 02) Touch the SET button to enter the menu. The display will show: The device’s RDM code is: 29B4:0C2xxxxx. Product code: 42668... -
Page 30: Dmx Channels
R 000; G 000; B 100; W 200 A 000 U 255 231–255 Color 33 R 255; G 255; B 255; W 255 A 255 U 255 000–015 No function 016–031 Color switch 1 Built-in 032–047 Color switch 2 Programs 048–063 Color switch 3 064–079 Color switch 4 Product code: 42668... - Page 31 Make sure that Built-in Programs channel is closed, if you want to use Color Presets channel. ● Make sure that Built-in Programs channel is open, if you want to use Program Speed channel. ● Make sure that Pulse Strobe channel is closed, if you want to use Linear Strobe channel. Product code: 42668...
-
Page 32: Rdm Information
This device supports RDM. Refer to 6.8.2. Supported RDM PIDs (Parameter IDs) for more information. 6.8.1. RDM Details ● Responder: 29B4:0C2xxxxx ● Manufacturer's ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: Cameleon Bar 15Q6 Tour ●... -
Page 33: Remote Control
Fig. 11. If you point the remote control to the infrared sensor (03) of the device outside of the range of the sensor, the device will not respond to the remote control (Fig. 12). Fig. 11 Fig. 12 Product code: 42668... - Page 34 Description On/Off Turns the LEDs on/off Auto Activates Auto mode Program Activates Built-in Programs mode No function Speed Activates program speed adjustment Strobe Activates strobe frequency adjustment Dimming Activates Manual mode Plus Increase value Minus Decrease value Product code: 42668...
-
Page 35: Auto
33 color presets. Strobe Press the button to set the strobe frequency. Press the buttons to increase/decrease the strobe frequency. The adjustment range is 0– 99, from OFF to high strobe frequency. Product code: 42668... -
Page 36: Program Speed
RGBWA-UV colors. Press the buttons to set the LED brightness of the selected color. The adjustment range is 0–255. You can combine Red, Green, Blue, White, Amber and UV to create an infinite range of colors. Product code: 42668... -
Page 37: Troubleshooting
LEDs are damaged your Highlite International dealer No light or LEDs cut The power supply settings do not out intermittently ● Disconnect the device. Check the match local AC voltage and settings and correct, if necessary frequency Product code: 42668... -
Page 38: Maintenance
Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. ● Make sure that the connections are fully dry before connecting the device to the power supply and to other devices. Product code: 42668... -
Page 39: Draining Condensation Water
Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. Product code: 42668... -
Page 40: Deinstallation, Transportation And Storage
For more detailed information about recycling of this product contact the local authorities or the authorized dealer. Approval Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity. Product code: 42668... - Page 41 Cameleon Bar 15 Q6 Tour Product code: 42668...
- Page 42 Cameleon Bar 15 Q6 Tour Product code: 42668...
- Page 43 Cameleon Bar 15 Q6 Tour Product code: 42668...
- Page 44 ©2023 Showtec...