Related Manuals for SHOWTEC 42681
Summary of Contents for SHOWTEC 42681
- Page 1 USER MANUAL ENGLISH Cameleon Flood 15 Q4 Tour Product code: 42681 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Cameleon Flood 15 Q4 Tour Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Control Modes ..............................17 Control Panel ..............................18 Start-up ................................18 Menu Overview ..............................19 Main Menu Options ............................21 DMX Settings ............................21 Address ..............................22 Channels ..............................22 Manual Mode ............................22 Auto................................23 Program ..............................23 Program 01 ............................24 Programs 02–16 ...........................24 Master/Slave Mode ..........................24 Settings ..............................25 Product code: 42681... - Page 4 Safety Instructions for Maintenance ......................35 Preventive Maintenance ..........................35 Basic Cleaning Instructions ........................36 Corrective Maintenance ..........................36 Deinstallation, Transportation and Storage ....................37 Instructions for Deinstallation ..........................37 Instructions for Transportation ........................37 Storage ................................37 10. Disposal ................................37 11. Approval ................................37 Product code: 42681...
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Cameleon Flood 15 Q4 Tour ● Schuko to pro power True1 cable (1,5 m) ●... -
Page 6: Symbols And Signal Words
The information label contains the following symbols: This device shall not be treated as household waste. This device is rated IP65. This device falls under IEC protection class I. Minimum distance from lighted objects. Product code: 42681... -
Page 7: Safety
Do not immerse the device in water or other liquids. Do not install the device in a location where flooding may occur. ● Do not use the device during thunderstorms. Disconnect the device from the electrical power supply immediately. ● Keep the connectors sealed with the rubber caps when the connectors are not in use. Product code: 42681... - Page 8 This device is not suitable for households and for general lighting. ● This device is not designed for permanent operation. ● This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. Product code: 42681...
-
Page 9: Requirements For The User
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device. Product code: 42681... -
Page 10: Description Of The Device
Cameleon Flood 15 Q4 Tour Description of the Device The Showtec Cameleon Flood 15 Q4 Tour is an IP65-rated outdoor wall washer. It is equipped with 15 4-in- 1 RGBW LEDs. Front View 01) Infrared sensor 02) 15 x 5 W RGBW LEDs 03) Mounting bracket Fig. -
Page 11: Product Specifications
Maximum housing temperature t 70 °C Minimum distance: Minimum distance from flammable surfaces: Minimum distance to lighted object: 0,5 m Optional Accessories You can additionally purchase the following accessories: Product code: 44002 (Showtec UR-5 Universal IR Remote) Product code: 42681... -
Page 12: Dimensions
The minimum distance between the light output and the illuminated surface must be bigger than 0,5 m. ● The maximum ambient temperature t = 40 °C must never be exceeded. ● The relative humidity must not exceed 50 % with an ambient temperature of 40 °C. Product code: 42681... -
Page 13: Rigging
(05), as shown in Fig. 05. Fig. 05 Angle Adjustment You can adjust the angle of the device. Tilt the device to the desired angle (see Fig. 06). The tilt range is <180°. Fig. 06 Product code: 42681... -
Page 14: Connecting To Power Supply
● Do not link more devices on one power link than the maximum recommended number. Maximum recommended number of devices: ● at 100–120 V: 19 devices ● at 200–240 V: 38 devices Product code: 42681... -
Page 15: Setup
In order to connect more than 32 devices on one data link, you must use a DMX optically isolated splitter/booster, otherwise this may result in deterioration of the DMX signal. Note: ● Maximum recommended DMX data link distance: 300 m ● Maximum recommended number of devices on a DMX data link: 32 devices Product code: 42681... -
Page 16: Dmx Cables
04) Set the first device on the data link as a master device. See 6.6.5. Master/Slave Mode on page 24 for more information. 05) Set the remaining devices to slave mode. See 6.6.5. Master/Slave Mode on page 24 for more information. Fig. 08 Product code: 42681... -
Page 17: Dmx Linking
04) Continue assigning the starting addresses of the remaining devices by adding each time 10 to the previous number. Make sure that you do not have any overlapping channels in order to control the Cameleon Flood 15 Q4 Tour correctly. If two or more devices are addressed similarly, they will work similarly. Product code: 42681... -
Page 18: Operation
01) Set the DMX starting address of the device in Address menu. See 5.3.5. DMX Addressing on page 16 and 6.6.1.1. Address on page 22. 02) Select the DMX channel mode. See 6.6.1.2. Channels on page 22 for more information. See 6.7. DMX Channels on pages 28–29 for complete overview of all DMX channels. Product code: 42681... -
Page 19: Control Panel
By default the display is locked. To access the main menu, you need to enter the password. Touch and hold the MODE and SET buttons for 3 seconds to unlock the display. See 6.6.6.5. Lock on page 27 for more information. Product code: 42681... -
Page 20: Menu Overview
Cameleon Flood 15 Q4 Tour Menu Overview Product code: 42681... - Page 21 Cameleon Flood 15 Q4 Tour Product code: 42681...
-
Page 22: Main Menu Options
02) Touch the SET button to enter the menu. The display will show: Touch the UP/DOWN buttons to select one of the 2 submenus: ● ADDRESS ● CHANNELS Touch the SET button to open the desired submenu. Product code: 42681... -
Page 23: Address
Touch the UP/DOWN buttons to set the LED brightness. The adjustment range for each color is 0–255, from dark to brightest. Touch the SET button to save your settings. You can combine Red, Green, Blue and White to create an infinite range of colors (0–255). Product code: 42681... -
Page 24: Auto
03) Touch the UP/DOWN buttons to choose MODE and touch the SET button to enter the menu. The display will show: 04) Touch the UP/DOWN buttons to choose one of the 16 built-in programs. Touch the SET button to confirm your choice. Product code: 42681... -
Page 25: Programs 02-16
03) Touch the UP/DOWN buttons to choose YES or NO. 04) Touch the SET button to confirm your choice. 05) If you have chosen YES, the device will be set as a slave and will react the same as the master device. Product code: 42681... -
Page 26: Settings
04) Touch the SET button to enter the desired submenu. Curves Select In this menu you can set the dimming curves. 01) Touch the UP/DOWN buttons to choose one of the 4 dimming curves. 02) Touch the SET button to confirm your choice. Product code: 42681... -
Page 27: Dimmer Speed
In this menu you can set the devices’ behavior, while using multiple Cameleons. 01) Touch the UP/DOWN buttons to select ON (all Cameleons will simultaneously perform the same action, without any delays) or OFF (risk of random delays). 02) Touch the SET button to confirm your choice. Product code: 42681... -
Page 28: Lock
In this menu you can view the device’s current software version, temperature, total lifetime and the UID (device’s RDM code). 01) While in the main menu, touch the UP/DOWN buttons to choose INFORMATION. 02) Touch the SET button to enter the menu. The display will show: The device’s RDM code is: 29B409A00001. Product code: 42681... -
Page 29: Dmx Channels
R 000; G 000; B 100; W 255 231–255 Color 33 R 255; G 255; B 255; W 255 000–015 No function 016–031 Program 1 032–047 Program 2 Built-in Programs 048–063 Program 3 064–079 Program 4 080–095 Program 5 096–111 Program 6 Product code: 42681... -
Page 30: Supported Rdm Pids (Parameter Ids)
Make sure that Built-in Programs channel is open, if you want to use Program Speed channel. Supported RDM PIDs (Parameter IDs) Parameter ID Discovery command SET command GET command DISC_UNIQUE_BRANCH DISC_MUTE DISC_UN_MUTE DEVICE_INFO SOFTWARE_VERSION_LABEL DMX_START_ADDRESS IDENTIFY_DEVICE SUPPORTED_PARAMETERS SENSOR_DEFINITION SENSOR_VALUE DMX_PERSONALITY DMX_PERSONALITY_DESCRIPTION RESET_DEVICE Product code: 42681... -
Page 31: Remote Control
Fig. 11. If you point the remote control to the infrared sensor (01) of the device outside of the range of the sensor, the device will not respond to the remote control (Fig. 12). Fig. 11 Fig. 12 Product code: 42681... - Page 32 Turns the LEDs on/off Auto Activates Auto mode Program Activates Built-in Programs mode No function Speed Activates program speed adjustment Strobe Activates strobe frequency adjustment Dimming Activates Manual mode Plus Increase value Minus Decrease value Activates Red LEDs Product code: 42681...
-
Page 33: Auto
33 color presets. Strobe Press the button to set the strobe frequency. Press the buttons to increase/decrease the strobe frequency. The adjustment range is 0– 99, from OFF to high strobe frequency. Product code: 42681... -
Page 34: Program Speed
RGBW colors. Press the buttons to set the LED brightness of the selected color. The adjustment range is 0–255. You can combine Red, Green, Blue and White to create an infinite range of colors. Product code: 42681... -
Page 35: Troubleshooting
LEDs are damaged your Highlite International dealer No light or LEDs cut The power supply settings do not out intermittently ● Disconnect the device. Check the match local AC voltage and settings and correct, if necessary frequency Product code: 42681... -
Page 36: Maintenance
The safety devices are not damaged. ● There are no deformations on housings, fixations and installation points. ● The lens is not cracked or damaged. ● The power cables are not damaged and do not show any material fatigue. Product code: 42681... -
Page 37: Basic Cleaning Instructions
Corrective Maintenance The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information. Product code: 42681... -
Page 38: Deinstallation, Transportation And Storage
For more detailed information about recycling of this product contact the local authorities or the authorized dealer. Approval Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity. Product code: 42681... - Page 39 Cameleon Flood 15 Q4 Tour Product code: 42681...
- Page 40 ©2021 Showtec...