Threading The Twin Needle - Bernina 435 User Manual

> Pull the thread over the thread cutter (13) from the back and cut.
> Release the threader lever and the thread at the same time to thread the needle.
– The thread is pushed through the needle eye.
> Pull the loop of thread (14) to the rear until the end of the thread is pulled through the needle.
> Pull the thread below the presser foot and through to the thread cutter (15), and cut it.

Threading the Twin Needle

Prerequisite:
• The twin needle is inserted.
> Guide the first thread in direction of the arrow on the right side of the tension disc (1).
> Guide the second thread in direction of the arrow on the left side of the tension disc (1).
1
> Guide the first and the second thread to the thread guide above the needle.
> Thread the first thread manually into the right needle.
Sewing Preparation
39