Diagnostics And Troubleshooting; General Troubleshooting - Endress+Hauser Flowphant T DTT31 Flowphant T DTT35 Operating Instructions Manual

Flowphant T DTT31, DTT35
6.3.1 Additional operating options
In addition to the operating options listed in the previous "Onsite operation" section, further
information about the device is available via the FieldCare configuration software:
Function group
SERV (service)
INFO (device information) TAG 1
6.3.2 Notes on operation with FieldCare
FieldCare is a universal configuration and service software based on FDT/DTM technology.
The "PCP Communications DTM" and the Flowphant DeviceDTM are needed to configure
the Flowphant T DTT31/35 with FieldCare.
This device supports offline operation and the transfer of parameters from and to the
device. Online device operation is not supported.
Detailed information on FieldCare is provided in the associated Operating Instructions
(BA027/S/c4) or at www.endress.com.
7

Diagnostics and troubleshooting

7.1

General troubleshooting

If an error occurs in the device, the color of the status LED changes from green to red and the
lighting of the digital display from white to red. A flashing red/green status LED signals a
warning. The display shows:
• An E-code in the event of errors
The measured value is uncertain if an error occurs.
• A W-code in the event of warnings
The measured value is reliable if warnings occur.
Endress+Hauser
Function (display)
Switching operations 1
Switching operations 2, optional
TAG 2
Order code
Device serial number
Sensor serial number
Electronics serial number
Device version
Hardware revision
Software revision
Description
Number of changes in the switching state for switch
output 1; optionally for switch output 2
Tagging, 18-digit
Order code
-
-
-
Displays the overall device version
-
-
Diagnostics and troubleshooting
27