Technical Data; Output - Endress+Hauser Flowphant T DTT31 Flowphant T DTT35 Operating Instructions Manual

Flowphant T DTT31, DTT35
• PVC cable, 4x 0.34 mm
LED, elbowed,
• 316L screw plug, length5 m (16.4 ft), specially for
hygiene applications,
• Degree of protection (connected): IP69K
• Order number: 52018763
Display:
• gn: device is operational
• ye1: switch status 1
• ye2: switch status 2

Not suitable for 4 to 20 mA analog output!
10.2.2 Configuration kit
• Configuration kit for PC-programmable transmitters;
Configuration software and interface cable for PC with
USB port and 4-pin post connector
Order code: TXU10-AA
• "Commubox FXA291" configuration kit with interface
cable for PC with USB port. Intrinsically safe CDI
interface (Endress+Hauser Common Data Interface) for
transmitters with 4-pin post connector. Suitable
configuration software is FieldCare for example.
Order code: FXA291
10.2.3 Configuration software
The FieldCare ' D evice Setup' configuration programs can be downloaded free of charge from
the Internet at:
www.products.endress.com/fieldcare
FieldCare 'Device Setup' can also be ordered from an Endress+Hauser sales office.
11

Technical data

11.1

Output

11.1.1 Signal on alarm
Analog output: signal on alarm according to NAMUR NE43
Underranging
Overranging
Endress+Hauser
2 with M12x1 coupling, with
Linear drop to 3.8 mA
Linear rise to 20.5 mA
Technical data
ye1
gn
ye2
A0035844
USB
A0008067
35